PAC-TPL1520
SINGLE PHASE LEAKAGE TESTER 15A & 20A ADAPTOR (APPLIANCES ONLY)
Sales price $ 1,059.00
(Excluding GST)The ProTag PAC-TPL1520 single phase leakage adaptor provides users of the Seaward PrimeTest Elite & PAC3760 DL with the capability of powering up 15A and 20A single phase appliances and carrying out a leakage current test.
When used with the PrimeTest Elite, the test results are displayed on the PrimeTest Elite tester and logged as an asset test result. Automated test result logging removes the need for users to manually enter test results, guaranteeing fully accountable asset testing and tagging.
When used with the PAC3760 DL unit, the results are displayed on the PAC3760 DL with both the actual readings and a Pass/Fail display.
Procedure for carrying out tests is as follows:
1. Plug the Leakage Adaptor into the PrimeTest Elite or PAC3760 DL mains inlet socket.
2. Plug the equipment under test into the appropriate outlet socket on the Leakage Adaptor.
3. Depending on the outlet socket used plug the matching plug into the mains outlet.
4. Turn on the Leakage Adaptor.
5. Connect the Earth Continuity probe to the PrimeTest Elite or PAC3760 DL and to a metal part of the enclosure of the instrument under test.
6. Select 3 Phase Test sequence on the PrimeTest Elite or press the 3-Phase button on the PAC3760 plus test instrument.
7. The PrimeTest Elite or PAC 3760 DL instrument will now perform an Earth Continuity test and display the test result.
8. The PrimeTest Elite or PAC3760 DL instrument will then perform a leakage test, at this point turn ON the equipment under test. The test will continue to run continuously.
9. To stop the test press and hold the 3-Phase button on the PAC3760 DL test instrument.
10. When the tests are complete the PAC3760 DL or PrimeTest Elite test instruments will display whether the test sequence is a pass or fail.
2. Plug the equipment under test into the appropriate outlet socket on the Leakage Adaptor.
3. Depending on the outlet socket used plug the matching plug into the mains outlet.
4. Turn on the Leakage Adaptor.
5. Connect the Earth Continuity probe to the PrimeTest Elite or PAC3760 DL and to a metal part of the enclosure of the instrument under test.
6. Select 3 Phase Test sequence on the PrimeTest Elite or press the 3-Phase button on the PAC3760 plus test instrument.
7. The PrimeTest Elite or PAC 3760 DL instrument will now perform an Earth Continuity test and display the test result.
8. The PrimeTest Elite or PAC3760 DL instrument will then perform a leakage test, at this point turn ON the equipment under test. The test will continue to run continuously.
9. To stop the test press and hold the 3-Phase button on the PAC3760 DL test instrument.
10. When the tests are complete the PAC3760 DL or PrimeTest Elite test instruments will display whether the test sequence is a pass or fail.
Specifications
Earth Continuity see PrimeTest Elite or PAC3760 DL Test Instrument specifications
Test Voltage single phase supply voltage
Test Duration continuous
Display Range 0.15mA to 9.99mA
Measurement Range 0.25mA to 9.99mA
Accuracy +(5% + 2 digits)
Frequency Response 50Hz
Pass Value 5mA
Test Voltage single phase supply voltage
Test Duration continuous
Display Range 0.15mA to 9.99mA
Measurement Range 0.25mA to 9.99mA
Accuracy +(5% + 2 digits)
Frequency Response 50Hz
Pass Value 5mA