FHS-WACU-01

FORM STUDIO WASH & CURE

$396.00

Call for Price

Form Studio Wash+Cure is an all-in-one, compact, and affordable post-processing unit that handles both washing and curing for your resin 3D prints.

Washing mode: All resin 3D printed parts need washing to remove residual resin. Form Studio Wash+Cure agitates IPA or alternative solvents around parts for thorough, efficient cleaning. When washing is done, simply raise the internal basket out of the solvent to let parts air dry and avoid over-soaking, warped prints.

Curing mode: Using 405 nm light, Form Studio Wash+Cure completes the chemical reaction started during printing. Post-curing boosts part strength, toughness, heat resistance, and creep resistance, while leaving a harder, less tacky surface.

Form Studio Wash+Cure is compatible with IPA, TPM, and Resin Washing Solution.

Wash
Load parts directly on the build platform or into the basket. An impeller agitates solvent to remove uncured resin. Raise the basket at the end of the cycle to dry.

Cure
Drop the glass turntable into the chamber and start the post-cure. Parts rotate under 405 nm light so every face gets the same exposure.

Product Features

  • Single Benchtop Footprint: Combines washing and UV curing into one device to conserve valuable workspace.
  • Agitated Solvent Cleaning: An internal impeller circulates solvent (IPA, TPM, or Formlabs Resin Washing Solution) thoroughly across every surface.
  • 405 nm UV Exposure: Rotates parts on a stowable glass turntable under 405 nm light to complete cross-linking and eliminate surface stickiness.
  • Smart Profile Memory: Automatically retains the last-used wash and cure duration for repeatable, touch-of-a-button batch cycles.
  • Enclosed Safety Design: Designed for closed-lid washing to minimise solvent evaporation and contain flammable vapors.
  • Drain & Dry Position: Features a raised basket resting position to allow parts to air-dry post-wash without over-soaking in solvent.

Product Videos