See us at stand no G2 at AOG 2020 at the Perth Exhibition & Convention Centre on 11-13 March!
The annual Australasian Oil & Gas (AOG) Exhibition & Conference is the largest oil & gas event in Australia, featuring over 300 exhibiting brands and over 8,700 global visitors.
The Emona stand is located at stand G2, near the front entrance.
On display is the Markforged Mark II carbon fibre composite printer as well as the new Formlabs Form 3 SLS printer. We will also have sample parts on display printed on the Markforged Metal X printer including Markforged’s new copper material release and the Optomec LENS metal printers for repair, rework and manufacturing in titanium, stainless steel and super alloys.
EVENT RESCHEDULED.
Join us on Wednesday 18th of March at CSIRO’s Lab 22 in Clayton, for one of four 90 minute 3D printing hands-on workshops to launch another new material on the Markforged Metal X – “Copper”.
In each of the 4 x 90 minute hands-on workshop sessions throughout the day, we will:
• Review the trends in metal additive manufacturing • See the whole process from CAD to final 3D printed part • Discuss applications for copper metal 3D printing • Hear about the new Sinter-2 with a large active hot zone of 19,644 cubic cm • Walk away with tips on how to identify 3D printing opportunities on your production line • Hear how local companies are using Markforged composite carbon fibre and metal printers to facilitate their additive manufacturing transformation
By leveraging innovative technology to produce custom manufactured parts for your operations, you can avoid costly delays and downtime.
Included in each session is a short tour of the CSIRO’s Lab 22. Lab 22 is Australia’s centre for innovation in metallic additive manufacturing. CSIRO Lab 22 machines are categorised on how the raw material is fed (powder bed, cold spray, blown powder) or their heat source (e-beam or laser). They can also handle a wide variety of materials including ferrous metals, non-ferrous metals and sand.
You are invited to a Markforged Special Event: Garry Rogers Motorsport Factory Tour!
Garry Rogers Motorsport is an Australian motor racing team with a long and successful history in the V8 supercars. GRM are now competing in the Dunlop Super2 Series, S5000 and Australian TCR championships.
Guest speaker at this special event is Stefan Millard, Team Leader at Garry Rogers Motorsport. Stefan will discuss how the team utilise the Markforged Mark Two carbon fibre composite 3D printer. A qualified mechanical engineer, Mr. Millard has worked his way from data engineer to managing the team and the build of new race cars.
While learning about how Markforged has facilitated his organisation’s additive manufacturing transformation, attendees will also be treated to a factory tour of the Garry Rogers Motosports facility.
Refreshments will be provided. Click “Register” to secure your place. Places are limited, so register now to avoid disappointment.
Join us in Sydney on Wednesday 12th of June at University of Technology Sydney, ProtoSpace Laboratory, and Melbourne on Friday 14th of June at CSIRO Lab 22, for one of five 90 minute 3D printing hands-on workshops to show what the Future of Industrial Manufacturing holds.
See the Markforged Metal X 3D Printer in action and learn how quick and cost-effective parts can be designed and fabricated for manufacturing.
In each of the five 90 minute hands-on workshop sessions throughout the day, we will: • Review the trends in metal additive manufacturing • See the whole process from CAD to final 3D printed part • Learn about an innovative metal printing process priced from $215k • Hear real-world customer applications that prove their ROI • Walk away with tips on how to identify 3D printing opportunities on your production line • Hear how local companies are leveraging Markforged composite printers to print metal strength carbon fibre parts. By leveraging innovative technology to produce custom manufactured parts for your operations, you can avoid costly delays and downtime.
Included in the Sydney session is a short tour of the UTS Protospace Laboratory. ProtoSpace is a 900m² advanced additive manufacturing facility, offering industry partners, academics, and students access to a wide range cutting-edge 3D technologies, software, and technical expertise, and focusing on rapid prototyping, education, research and development.
The Melbourne session includes a short tour of CSIRO’s Lab 22. Lab 22 is Australia’s centre for innovation in metallic additive manufacturing. CSIRO Lab 22 machines are categorised on how the raw material is fed (powder bed, cold spray, blown powder) or their heat source (e-beam or laser). They can also handle a wide variety of materials including ferrous metals, non-ferrous metals and sand.
Register by Monday 10th of June to secure your seat at the events. Space is limited.
Come and see us at the Austech/National Manufacturing Week 2019 exhibtion next week at the Melbourne Convention & Exhibition Centre.
We will be located at the Emona Instruments Stand AM43, in the Additive Manufacturing Pavilion.
What’s new at the show:
See on display our MarkforgedMetal X metal 3D printer, printing in 17-4PH stainless steel, H13 tool steel, A2 tool steel, and soon printing in titanium, Inconel and copper.
New Markforged Onyx FR filament is a flame-retardant version of our nylon-based chopped carbon fiber material that’s UL94 V-0 rated down to a 3mm thickness. This new material expands your additive manufacturing applications to print parts where flammability is a consideration.
New Markforged Nylon White filament is a new stronger, stiffer Nylon material. The material exhibits a smooth, non-abrasive surface finish, and is reinforceable with any of our continuous fiber material options. Best of all, you can use Nylon White and Onyx interchangeably in the same printer — without swapping print heads.
Meet Dr Sampan Seth, Application Engineer at Optomec Asia Pacific Pte Ltd. Optomec printers directly print real end-user parts with materials such as structural metals, conductive metals, and other high value functional materials. Optomec printers are scalable for volume production applications such as printing 3D antennas used in smart phones or repairing metal components used in the aircraft industry.
Emona TIMS was recognised by National Instruments with the successful launch of NI ELVIS III at ECEDHA 2019 Annual Conference in Tuscon Arizona.
Emona TIMS was presented with a plaque by National Instruments (NI) at the recent “Electrical and Computer Engineering Department Heads Association” (ECEDHA) 2019 Annual Conference in Tuscon Arizona USA.
As an NI Ecosystem Partner, Emona TIMS was recognised for our role in ensuring the successful launch of NI ELVIS III, NI’s solution for project-based learning.
Pictured above receiving the plaque from National Instruments are (L to R) Carlo Manfredini, Emona TIMS R & D Director, Alfred Breznik, Emona TIMS Sales Director, Andy Bell, National Instruments Director Academic Programs and Gabriel Mok, National Instruments Product Manager Global Education Partners.
Emona TIMS was approached by NI in 2006 to create a telecoms teaching top board for NI ELVIS, resulting in Emona DATEx. Since 2007, Emona TIMS has supplied NI with over 5,000 top boards for NI ELVIS.
From June 26-28 Emona TIMS is exhibiting at the ASEE (American Society for Engineering Education) Exposition and presenting at the Global Online Laboratory Consortium (GOLC) Workshop on “Remote Laboratories – Learning from Successful Initiatives” in New Orleans, USA.
In our 19th year at ASEE, Emona TIMS is displaying our range of Australian designed and manufactured teaching equipment for university telecoms courses.
The ASEE Annual Conference and Exposition is the only conference dedicated to all disciplines of engineering education. The conference features more than 400 technical sessions, with peer-reviewed papers spanning all disciplines of engineering education.
We are also presenting Emona’s internet controlled lab equipment, net*TIMS, at the conference’s “Remote Laboratories – Learning from Successful Initiatives” Workshop. The sponsor of the Workshop is the GOLC (Global Online Laboratory Consortium) of which Emona is a corporate member. With the growth of Internet of Things (IoT) there is a tremendous interest toward Internet accessible remote laboratories. Emona’s net*TIMS offers real TIMS hardware experiments delivered simultaneously to multiple students across LAN & Internet in real-time.
The new high performance AXIOM 3D printer will be demonstrated at the Electronex exhibition in Melbourne Park Function Centre from 9th to 10th of September 2015 at the Emona Instruments display, stand A23.
Airwolf 3D is a US manufacturer of high performance 3D printers with user reference sites including Boeing, Apple, Dreamworks, NASA, HP, Honeywell, Lockheed Martin, Raytheon, to name a few.
Airwolf 3D offer market leading features that make it the AXIOM 3D printer the ideal desktop solution for rapid prototyping, as well as manufacturing of custom products.
Compare these features with other comparably priced 3D printers and the AXIOM wins every time:
40+ Materials with 315 Degrees C Hot End
Largest Build Volume in its class at 1000 Cubic Inches
Auto-Leveling ensures optimal bed leveling and head spacing before every print
“Easy Feed” Filament System draws the new filament into its print head automatically
40 Microns Resolution exceeds products more than twice the price with fine detailed layers
Core XY Motion System allows faster 250mm/s movement than common gantry systems
From June 13-15 Emona TIMS is exhibiting at the ASEE (American Society for Engineering Education) Conference and Exposition in Seattle Washington USA.
In our 18th year at ASEE, Emona TIMS is displaying our range of Australian designed and manufactured teaching equipment for university telecoms courses. We also presented Emona’s internet controlled lab equipment, net*TIMS, at the conference’s “Internet Accessible Remote Experimentation: Laboratories of Next Generation” Workshop. The sponsor of the Workshop was the GOLC (Global Online Laboratory Consortium) of which Emona is a corporate member.
We will be demonstrating the new MegiQ PC-Based VNAs at the Comms Connect exhibition on 3-4 June 2015 at Southee Complex, Sydney Showground.
With the VNA0440, MegiQ has launched an affordable and compact USB driven Vector Network Analyzer. This fully bi-directional two-port VNA allows detailed impedance measurements of antennas, components and circuits, covering 400to 4000MHz, i.e. all popular communication bands for GSM-LTE, GPS, ISM, Wifi, Dect etc. An extra generator output comes in handy for characterizing 3-port devices, like splitters and hybrids. The internal, programmable bias generator with bias-Tee’s allows fully automatic parametric measurements of e.g. amplifier and varactor / PIN circuits.
“All over the world engineers work on a myriad of RF applications, but they lack tools to verify their designs”, says Roger Denker, CEO of MegiQ. “In RF development you need to verify correct tuning and matching. MegiQ makes these measurements affordable and accessible to all bench-tops.”
The VNA and the PC software were developed by RF-engineers for RF-engineers with emphasis on use in real life. With the UFL test kit and the ‘RF Sandbox’ you are up and running within 10 minutes with a series of life experiments: very instructive for the novice user and entertaining for the expert.
The UFL kit allows measuring circuits on micro-PCBs, like baluns, antennas, amplifiers. Other kits are available: WFL, SMA, balanced, including calibration tools.
PC software provides intuitive control, extensive graphing, data export and reporting. Measurements and set-ups can be stored in sessions for easy ‘Retrace-and-Compare’. The handy ‘Click-and-Match’ calculates and simulates matching circuits.
